Preview

Informatics and education

Advanced search

K voprosu o tsifrovoj transformatsii predmetnogo obucheniya [About digital transformation of subject learning]

https://doi.org/10.32517/0234-0453-2020-35-9-53-63

Abstract

Digital education is carried out due to a deep transformation of the educational process and widespread use of digital educational technologies. Within the framework of subject learning, digital technologies are radically changing the content of the disciplines taught and the form of their presentation. The experience of creating a digital educational environment (DEE) in the framework of subject training is considered on the example of basic geometric and graphic training (GGT) of technical university students. Currently, the main factors shaping GGT are the paradigm of engineering education and methodology of design and development activities, which have undergone dramatic changes with the development of information technology. The basic concept of graphic education should initially and entirely be based on a digital 3D (volumetric) model that combines information about a product at all stages of its life cycle.

At the same time, applied geometric aspects should prevail over abstract geometry and graphics, not underestimating the role of theoretical foundations in the basic GGP. The architecture of building DEE of geometric-graphic training is presented, which integrates all types of educational activities and is based on the principle of “continuity” of the learning process in a digital environment at all stages of the educational process. The functional use of digital technologies in various forms of training sessions, which allows students to carry out independent activities, taking into account personalization, is noted. Practical examples of graphic tasks, design and test tasks are given. When organizing monitoring in DEE conditions, existing methodological developments can be used, adapted and integrated in terms of the DEE system and the paradigmatic concept of GGT. Monitoring of learning outcomes in assessing digital competence, along with the constant improvement of test control, implies its completion with other forms of assessing the achievements of students.

About the Authors

I. D. Stolbova
Perm National Research Polytechnic University
Russian Federation

Irina D. Stolbova - Doctor of Sciences (Engineering), Docent, Head of the Department Design, Descriptive Geometry and Graphics.

614900, Perm, Komsomolsky prospect, 29



L. V. Kochurova
Perm National Research Polytechnic University
Russian Federation

Lyudmila V. Kochurova - Senior Lecturer at the Department Design, Descriptive Geometry and Graphics.

614900, Perm, Komsomolsky prospect, 29



K. G. Nosov
Perm National Research Polytechnic University
Russian Federation

Konstantin G. Nosov - Senior Lecturer at the Department Design, Descriptive Geometry and Graphics.

614900, Perm, Komsomolsky prospect, 29



References

1. Safuanov R. M., Lehmus M. Yu., Kolganov E. A. Tsifrovizatsiya sistemy obrazovaniya [Digitalization of the education system]. Vestnik UGNTU. Nauka, obrazovanie, ehkonomika. Seriya ehkonomika — Bulletin of USPTU. Science, education, economics. Economics series, 2019, no. 2, p. 116-121. (In Russian.) Available at: http://ogbus.ru/index.php/bul/article/view/9922

2. Nikulina T. V., Starichenko E. B. Informatizatsiya i tsifrovizatsiya obrazovaniya: ponyatiya, tekhnologii, upravlenie [Informatization and digitalization of education: concepts, technologies, management]. Pedagogicheskoe obrazovanie v Rossii — Pedagogical Education in Russia, 2018, no. 8, p. 107-113. (In Russian.) Available at: http://journals.uspu.ru/attachments/article/2133/14.pdf

3. Bogoslovsky V. I., Busygina A. L., Aniskin V. N. Kontseptual’nye osnovy vysshego obrazovaniya v usloviyakh tsifrovoj ehkonomiki [Conceptual foundations of higher education in the digital economy]. Samarskij nauchnyj vestnik — Samara Journal of Science, 2019, vol. 8, no. 1, p. 223-230. (In Russian.) Available at: https://snv63.ru/2309-4370/article/view/21613

4. Omarova S. K. Sovremennye tendentsii obrazovaniya v ehpokhu tsifrovizatsii [Modern trends of education in the era of digitization]. Pedagogika. Voprosy teorii ipraktiki — Pedagogy. Theory & Practice, 2018, no. 1, p. 78-83. (In Russian.) DOI: 10.30853/pedagogy.2018-1.17

5. Bilenko P. N., Blinov V. I., Dulinov M. V., Yesenina E. Yu., Kondakov A. M., Sergeev I. S. Pedagogicheskaya kontseptsiya tsifrovogo professional’nogo obrazovaniya i obucheniya [Pedagogical concept of digital vocational education and training]. 2020. 98 p. (In Russian.) Available at: https://firo.ranepa.ru/files/docs/spo/cifrovaya_didactika/pedagogicheskaya_koncepciya_cifrovogo_prof_obr_i_obuch_jan2020.pdf

6. Tulchinsky G. L. Tsifrovaya transformatsiya obra-zovaniya: vyzovy vysshej shkole [Digital transformation of education: challenges for higher school]. Filosofskie nauki — Russian Journal of Philosophical Sciences, 2017, no. 6, p. 121-136. (In Russian.) Available at: https://www.phisci.info/jour/article/view/371

7. Gornov A. O, UsanovaE. V., ShatsilloL. A. Ob”ektivnye protivorechiya GGP v kontekste sovremennykh tendentsij v inzhenernom obrazovanii i metodologii proektirovaniya [Objective contradictions of GGT in the context of modern trends in engineering education and design methodology]. Problemy koordinatsii raboty tekhnicheskikh vuzov v oblasti povysheniya kachestva inzhenerno-graficheskoj podgotovki studentov. Materialy nauchno-metodicheskoj konferentsii [Problems of coordinating the work of technical universities in the field of improving the quality of engineering and graphic training of students. Materials of the scientific and methodological conference]. Rostov-on-Don, DSTU, 2018, p. 12-24. (In Russian.)

8. Pokholkov Yu. P., Rozhkova S. V., Tolkacheva K. K. Primenenie praktiko-orientirovannykh obrazovatel’nykh tekhnologij pri podgotovke inzhenernykh kadrov [Application of practice-oriented educational technologies in the training of engineering personnel]. Vestnik Kazanskogo tekhnologicheskogo universiteta — Bulletin of Kazan Technological University, 2013, vol. 16, no. 16, p. 56-59. (In Russian.)

9. Chuchalin A. I. Inzhenernoe obrazovanie v ehpokhu industrial’noj revolyutsii i tsifrovoj ehkonomiki [Engineering education in the epoch of industrial revolution and digital economy]. Vysshee obrazovanie v Rossii — Higher Education in Russia, 2018, vol. 27, no. 10, p. 47-62. (In Russian.) DOI: 10.31992/0869-3617-2018-27-10-47-62

10. Zhurakovsky V. M. Sovremennye tendentsii razvitiya inzhenernogo obrazovaniya na osnove integratsii obrazova-niya, nauki i innovatsij [Modern trends in the development of engineering education based on the integration of education, science and innovation]. Yakutsk, NEFU, 2017, p. 13-28. (In Russian.)

11. Karakozov S. D., Uvarov A. Yu. Uspeshnaya infor-matizatsiya — transformatsiya uchebnogo protsessa v tsi-frovoj obrazovatel’noj srede [Successful informatization = transformation of the educational process in the digital educational environment]. Problemy sovremennogo obrazova-niya — Problems of Modern Education, 2016, no. 2, p. 7-19. (In Russian.)

12. Makeeva A. V., Vaganova O. I., Smirnova J. V. Primenenie razlichnykh form informatsionno-kommunikat-sionnykh tekhnologij v usloviyakh tsifrovogo obrazovate-l’nogo prostranstva [The use of various forms of information and communication technologies in a digital educational space]. Innovatsionnaya ehkonomika: perspektivy razvitiya i sovershenstvovaniya — Innovative Economics: Prospects for Development and Improvement, 2018, no. 6, p. 126-130. (In Russian.)

13. Petrova V. N., Larionova A. V. Individualizatsiya ob-razovaniya v smeshannom obuchenii kak prediktor professio-nal’nogo razvitiya budushhego spetsialista [Individualization of education in blended learning as a predictor of future specialists’ professional development]. Otkrytoe i distant-sionnoe obrazovanie — Open and Distance Education, 2018, no. 4, p. 32-39. (In Russian.) Available at: http://journals.tsu.ru//ou/&journal_page=archive&id=1777

14. Alexandrova E. P., Nosov K. G., Stolbova I. D. Prak-ticheskaya realizatsiya proektno-orientirovannoj deyate-l’nosti studentov v khode graficheskoj podgotovki [Practical implementation of student’s project-oriented activities during graphical training]. Otkrytoe obrazovanie — Open Education, 2015, no. 5, p. 55-62. (In Russian.)

15. Stolbova I. D., Aleksandrova E. P., Kochurova L. V. Organizatsiya upravleniya graficheskim obrazovaniem v usloviyakh tsifrovizatsii [Organization of graphic education management in terms of digitalization]. Informatika i obrazovanie — Informatics and Education, 2019, no. 9, p. 47-55. (In Russian.)

16. Stolbova I. D., Alexandrova E. P., Kochurova L. G. Logika innovatsij graficheskogo obrazovaniya [Logics of innovations in graphic education]. Otkrytoe i distantsionnoe obrazovanie — Open and Distance Education, 2019, no. 2, p. 26-34. (In Russian.) Available at: http://journals.tsu.ru/ou/&journal_page=archive&id=1829

17. Soldatova G. U., Shlyapnikov V. N. Tsifrovaya kom-petentnost’ rossijskikh pedagogov [Digital competence of Russian school teachers]. Psikhologicheskaya nauka i obrazo-vanie — Psychological science and education, 2015, vol. 20, no. 4, p. 5-18. (In Russian.) DOI: 10.17759/pse.2015200401

18. Timoshevskaya N. V., Kartseva N. S., Kovalenko O. G. Sistemnaya inzheneriya proektirovaniya innovatsij [System engineering of innovation design]. Molodoj uchenyj — Young Scientist, 2016, no. 2, p. 593-596. (In Russian.) Available at: https://moluch.ru/archive/106/25219/

19. Britsko G. V. Osobennosti organizatsii logisticheskoj podderzhki zhiznennogo tsikla slozhnoj innovatsionnoj produktsii [Peculiarities organization of logistic support life cycle complex innovative products]. Vestnik universiteta — University Bulletin, 2014, no. 12, p. 5-11. (In Russian.)

20. Sagadeev V. V., Smirnova L. A., Kiryagina M. E. Tekhnologii geometricheskogo modelirovaniya v formiro-vanii proektno-konstruktorskoj kompetentsii [Technology geometric modeling in the formation of design competence]. Vestnik Kazanskogo gosudarstvennogo ehnergeticheskogo universiteta — Bulletin of Kazan State Power Engineering University, 2019, vol. 11, no. 4, p. 47-54. (In Russian.)

21. Zhetesova G. S., Ernazarova M. A. Avtomatizacija kontrolja znanij studentov pri modul’noj forme obuchenija na osnove programmnogo obespechenija [Automation of students knowledge at modular form of education based on the software]. Fundamental’nye issledovaniya — Fundamental Research, 2014, no. 6-2, p. 355-359. (In Russian.) Available at: https://fundamental-research.ru/ru/article/view?id=34164

22. Klyuev S. G., Sizonenko A. B. Sistema monitoringa i upravleniya kachestvom formirovaniya professional’nykh kompetentsij u obuchayushhikhsya [The system of monitoring and quality management of formation of professional competence of studying]. Obshhestvo i pravo — Society and Law, 2016, no. 3, p. 234-237. (In Russian.) Available at: https://mvd.ru/upload/site119/folder_page/003/467/465/sl-2016-357-1.pdf

23. Kochurova L. V., Kuznetsova L. A., Stolbov O. V., Stolbova I. D. Monitoring kachestva graficheskoj podgotovki na osnove sistemy avtomatizirovannogo kontrolya [Monitoring of the quality of graphical training on the basis of the automated control system]. Problemy kachestva graficheskoj podgotovki studentov v tekhnicheskom vuze: traditsii i inno-vatsii — Quality Problems of Graphic Preparation of Students in a Technical University: Traditions and Innovations, 2017, vol. 1, p. 304-320. (In Russian.)


Review

For citations:


Stolbova I.D., Kochurova L.V., Nosov K.G. K voprosu o tsifrovoj transformatsii predmetnogo obucheniya [About digital transformation of subject learning]. Informatics and education. 2020;(9):53-63. (In Russ.) https://doi.org/10.32517/0234-0453-2020-35-9-53-63

Views: 599


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0234-0453 (Print)
ISSN 2658-7769 (Online)